SHOCKS / SPRINGS
ASSEMBLY VIEW
REF
DESCRIPTION
q
Spring Adjuster
w
Spring Retainer
e
Nuts
SHOCK REMOVAL / INSTALLATION
1. Elevate the vehicle off the ground to relieve the
suspension load.
2. Remove the upper and lower fasteners retaining the
shock and remove the shock from the vehicle.
3. Reverse the procedure to reinstall the shock. Torque
NEW fasteners to specification.
TORQUE
Shock Fasteners:
40 ft-lbs (54 Nm)
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
SHOCK REPLACEMENT
1. Using a spring compressor, compress the shock
NOTES
2. Remove the spring and adjusting cam from the
3. Compress the shock spring and install the spring
Torque to 40 ft-lbs
(54 Nm)
4. Reinstall the shock onto the vehicle and torque new
STEERING / SUSPENSION
spring far enough to remove the spring retainer.
existing shock and install components onto the new
shock.
retainer.
fasteners to specification.
TORQUE
Shock Bolt Torque:
40 ft-lbs (54 Nm)
8
8.15