3. Clean the area around the main oil gallery plug
located on the oil filter adapter housing.
4. Remove the plug and insert the oil pressure adapter.
ENGINE OIL FLOW CHART
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
ENGINE / COOLING SYSTEM
q
,
5. Start the engine and allow it to reach operating
temperature while monitoring gauge indication.
Test results are based on the use of the recommended
engine oil (5W-50) at operating temperature, and may
vary considerably if any other oil is used or if engine is
not up to temperature.
6. Upon assembly, torque the crankcase gallery plug to
specification.
Oil Gallery Plug:
11 ft-lbs (15 Nm)
NOTE
TORQUE
3
3.5