Digital Wrench® Updates - Taylor-Dunn G0-010-00 Service And Replacement Parts Manual

DIGITAL WRENCH® UPDATES
Updates are released for Digital Wrench® via the
Internet at: http://polaris. diagsys. com. The Digital
Wrench® website can also be accessed through the
dealer website at: www.polarisdealers.com.
NOTE
Only authorized TAYLOR-DUNN dealers and
distributors can access the dealer website.
1. Log on to www.polarisdealers.com.
2. Locate the "Service and Warranty" drop-down
menu.
3. Click on "Digital Wrench Updates".
4. The Digital Wrench® portal website should appear in
a new web browser.
5. Click on "Digital Wrench Version Updates".
NOTE
You must already have the current version installed
before adding an update. Updates will not install if you
are using an older version loaded on your PC.
6. If the update file date listed is newer than your current
version and update (see Chapter 4 to download the
file).
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
7. Click on the link shown above, save the file to your
hard disk and then double-click the icon to start the
update process.
NOTE
Do not "run" or "open" the file from where they are.
Select "save" and download them to your PC before
running the install.
8. When the update is complete, the version shown on
the right side of the Digital Wrench® start-up screen
should match the update you just downloaded.
NOTE
Versions and updates are subject to change.
FUEL SYSTEM
4
4.41