Shift Weight Inspection - Taylor-Dunn G0-010-00 Service And Replacement Parts Manual

spring coils are parallel to one another. Distortion of the
spring indicates stress fatigue, requiring replacement.
Drive Clutch Spring Specifications
COLOR
Red / Orange
Black
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
FREE LENGTH
2.54 (64.52 mm)
2.8" (71.12 mm)

SHIFT WEIGHT INSPECTION

1. Remove shift weight bolts and weights. Inspect the
contact surface of the weight
be smooth and free of dents or gall marks. Inspect
the weight pivot bore and bolts
If weights or bolts are worn or broken, replace in sets
of three with new bolts and nuts.
WARNING
The clutch assembly is a precisely balanced unit. Never
replace parts with used parts from another clutch
assembly!
NOTICE
A damaged shift weight is usually caused by a
damaged or stuck roller in the spider assembly. See
"Roller, Pin and Thrust Washer Inspection".
CVT SYSTEM
q
. The surface should
w
for wear or galling.
5
5.15