Suspension; Suspension Inspection; Spring Pre-Load Adjustment; Stabilizer Bar Pivot Lubrication - Taylor-Dunn G0-010-00 Service And Replacement Parts Manual

SUSPENSION

SUSPENSION INSPECTION

Compress and release the suspension. Damping should
be smooth throughout the range of travel.
• Check all suspension components and mounting
fasteners for wear or damage.
• Inspect each shock body for leakage.

SPRING PRE-LOAD ADJUSTMENT

The rear shock absorber springs are adjustable. Rotate
q
the adjuster cam either direction to increase or
decrease spring tension. Always adjust both left and right
sides equally.
Vehicle loads effect suspension
requirements. Use Spanner Wrench to adjust pre-load as
necessary to avoid bottoming of the shocks.
Shock Spanner Wrench
2871095
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN

STABILIZER BAR PIVOT LUBRICATION

1. Grease stabilizer bar pivots
until old grease is purged from the joint and new
grease appears. Inspect link isolators
spring pre-load
MAINTENANCE
q
with a grease gun
w
for cracks.
2
2.29