Taylor-Dunn G0-010-00 Service And Replacement Parts Manual page 101

REF. DESCRIPTION
q Screw
w Spark Plug
e Screw
r Fuel Injector
t Screw
y T-MAP Sensor
Intake Boot
u
i Screw
o Screw
a Screw
s Screw
d Starter Motor
f Dipstick
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
ENGINE / COOLING SYSTEM
NOTES
Torque: 106 in-lbs (12 Nm)
Torque in sequence shown in this chapter.
Apply Anti-Seize to threads prior to assembly.
Torque: 89 in-lbs (10 Nm)
Apply P80 rubber lubricant prior to assembly.
Torque: 26 in-lbs (2.8 Nm)
Apply P80 rubber lubricant prior to assembly.
Apply P80 rubber lubricant prior to assembly.
Torque: (22.5 Nm)
Torque: (22.5 Nm)
Torque: 89 in-lbs (10 Nm)
Torque: 89 in-lbs (10 Nm)
Apply grease to starter o-ring.
Apply engine oil to o-ring
3
3.41