Engine Mounting And Torque Values - Taylor-Dunn G0-010-00 Service And Replacement Parts Manual

ENGINE / COOLING SYSTEM
1. Fill fuel tank with unleaded fuel which has a minimum
pump octane number of 87 = (R+ M)/2.
2. Refer to Chapter 2. Check oil level indicated on the
dipstick. Add oil if necessary.
3. Drive slowly at first to gradually bring engine up to
operating temperature.

ENGINE MOUNTING AND TORQUE VALUES

REF.
DESCRIPTION
q Bolt
w Bolt
e Nut
r Bolt
3.14
4. Vary throttle positions. Do not operate at sustained
idle or sustained high speed.
5. Perform regular checks on fluid levels, controls and
all important bolt torques.
6. Change oil and oil filter after break-in period at 25
hours.
NOTES
Torque to 55 ft-lbs (75 Nm)
Torque to 40 ft-lbs (54 Nm)
Torque to 25 ft-lbs (34 Nm)
Torque to 18 ft-lbs (25 Nm)
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN