Brake Pedal; Pedal Removal; Pedal Installation - Taylor-Dunn G0-010-00 Service And Replacement Parts Manual

BRAKE SYSTEM

BRAKE PEDAL

PEDAL REMOVAL

1. Remove the retaining clip
e
the master cylinder
r
.
2. Remove the brake pedal pivot fastener and bushings
t
off the mount bracket.

PEDAL INSTALLATION

1. Reverse steps for foot brake installation.
2. Tighten pivot bolt sufficiently. Refer to the general
torque specifications in Chapter 1.
9.8
q w
and clevis pin
to free it from the brake pedal
from
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN