How To Identify Your Vehicle - Taylor-Dunn BG-015-00 Operation, T Roubleshooting And Replacement Parts Manual

INTRODUCTION

HOW TO IDENTIFY YOUR VEHICLE

This manual applies to vehicles with the same model and serial numbers listed on the front cover.
These vehicles are designed for driving on smooth surfaces in and around facilities such as industrial
plants, nurseries, institutions, motels, mobile home parks, and resorts. They are not to be driven on
public highways.
This vehicle conforms to requirements for Type G vehicles as described in O.S.H.A. Standard Section
1910.178 (Powered Industrial Trucks) and with all applicable portions of the American National Standard
for Personnel and Burden Carriers (ANSI B56.8).
The locations of the model and serial numbers are illustrated below:
This vehicle is not designed to be driven on public roads or highways.
It is available in maximum designed speed of 18 mph. Do not exceed
the maximum designed speed. Exceeding the maximum designed
speed may result in steering difficulty, motor damage, and/or loss of
control. Do not exceed locally imposed speed limits. Do not tow this
vehicle at more than 5 mph.
Introduction
As viewed from the rear of the vehicle
Page-6