General Information; Special Tools; Engine Lubrication Specifications; Oil Pressure Test - Taylor-Dunn G0-010-00 Service And Replacement Parts Manual

ENGINE / COOLING SYSTEM

GENERAL INFORMATION

SPECIAL TOOLS

PART NUMBER TOOL DESCRIPTION
Bench Mount Engine Stand Adapter
PW-47053
PU-50658 Clutch Center Distance Tool
PU-50784 Crankshaft Removal / Installation Tool Kit
Cylinder Holding & Camshaft Timing Plate
PU-50563
Engine Stand (2" Bore)
PU-50624
Engine Stand Adapter (Mounts To The Engine)
PU-50824
Engine Stand Sleeve Adapter (Use With 2" Bore Stand)
PU-50625
Engine Stand Sleeve Adapter (Use With 2.375" Bore Stand)
PW-47054
Flywheel Puller
PA-49316
PU-50105 Oil Filter Wrench
Oil Pressure Gauge
PV-43531
Oil Pressure Gauge Adapter
PU-50569
PA-49317 Stator Cover Removal Handles
Valve Spring Compressor
PV-1253
Valve Spring Compressor Adapter
PV-43513-A
Water Pump Mechanical / Oil Seal Installation Kit
PU-50689
Bosch Automotive Service Solutions: 1-800-345-2233 http://polaris.service-solutions.com/.

ENGINE LUBRICATION SPECIFICATIONS

FLUID CAPACITY
Oil Capacity
Approx. 2 Quarts (1.9 L)
Oil Filter Wrench
PU-50105 or 2.5" (64 mm)
Oil Type
5W-50 Full Synthetic Engine Oil
Oil Pressure
Minimum Specification
(using 5W-50 at operating temperature)
10 PSI @ 1200 RPM (Minimum)
40 PSI @ 7000 RPM (Minimum)
3.4

OIL PRESSURE TEST

1. Attach the Oil Pressure Gauge Adapter to the Oil
Pressure Gauge.
Oil Pressure Gauge Adapter: PU-50569
Oil Pressure Gauge: PV-43531
2. Remove the seats and engine service panel.
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN