Digital Wrench® Operation; Digital Wrench® - Diagnostic Connector; Digital Wrench® Diagnostic Software Overview; Digital Wrench® Version And Update - Taylor-Dunn G0-010-00 Service And Replacement Parts Manual

FUEL SYSTEM
DIGITAL WRENCH® OPERATION
DIGITAL WRENCH® - DIAGNOSTIC
CONNECTOR
The diagnostic connector
shown.
DIGITAL WRENCH® DIAGNOSTIC
SOFTWARE OVERVIEW
Refer to Section 2, 3 and 4 in the Instruction Manual
provided in the Digital Wrench® Diagnostic Kit to install
the Digital Wrench® diagnostic software on your
computer.
The Digital Wrench® diagnostic software allows the
technician to perform
observations:
• View or clear trouble codes.
• Analyze real-time engine data.
• Reflash ECU calibration files.
• Perform guided diagnostic procedures.
• Create customer service account records.
• Perform output state control tests.
4.40
q
is located under the hood as
NOTE
the following tests
DIGITAL WRENCH® VERSION AND UPDATE
ID
Knowing what Digital Wrench® version and update is
installed will help determine which updates are required.
Versions and updates are subject to change.
1. Open the Digital Wrench® software. Locate the
version ID shown on the lower right side of the Digital
Wrench® start-up screen.
2. Proceed to http://polaris. diagsys. com to see if a
newer update is available.
and
3. If a newer update is available, it should be
downloaded before using Digital Wrench® (see
"Digital Wrench® Updates").
Always operate with the latest update.
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
NOTE
NOTE
© Copyright TAYLOR-DUNN