Table of Contents
Advertisement
Hosted Operation of Cascaded Stinger MRT units
Hosted MRT system management
assumed. For example, the following command shows PVC cross-connects on
shelf 2, slot 1:
HOST> atmvcx -s 2 1
Profile
Intf|Sh|Sl|Port|VPI|VCI|Oper
pvc-2-1-1
up
pvc-2-1-8
up
pvc-2-1-9
up
Monitoring the status of remote shelves
The remote-shelf-stat profile resides on the host for monitoring remote shelves.
The remoteshelf command displays information about enabled remote shelves in
the hosted system.
You can also set alarms and traps to notify an SNMP management station when
certain conditions occur on a remote shelf.
Using the remote-shelf-stat profile
When the host detects an enabled remote shelf, the system creates a
remote-shelf-stat profile for the shelf. For example:
HOST> dir remote-shelf-stat
As with other stat profiles, the remote-shelf-stat profile is read-only, and
maintains dynamic state information regarding the remote shelf. It is accessible
by SNMP managers. Following are the read-only fields in a profile for shelf 3:
[in REMOTE-SHELF-STAT/shelf-3]
remote-shelf-id* = shelf-3
host-port = { { any-shelf any-slot 0 } 0 }
remote-shelf-oper-state = remote-shelf-oper-state-up
name = MyShelfName
location = MyShelfLocation
internal-fan-unit-failed = no
external-fan-unit-failed = no
door-open = no
over-temperature = no
contact-closure = [ no no no no no no no ]
topology = { remote-shelf-cascade-port-none any-shelf any-shelf }
[in REMOTE-SHELF-STAT/shelf-2:host-port]
physical-address = { any-shelf any-slot 0 }
logical-item = 0
[in REMOTE-SHELF-STAT/shelf-2:contact-closure]
B-16
Low
Kind Intf|Sh|Sl|Port|VPI|VCI|Oper
Permanent VC X-Connects:
pvc 11
pvc 11
pvc 11
0 08/27/2003 16:11:22 shelf-2
0 08/27/2003 16:17:39 shelf-3
0 08/27/2003 16:13:33 shelf-4
1 17 1
0
1005 up
1 17 1
0
902 up
1 17 1
0
900 up
Stinger® MRT Getting Started Guide
High
311 2 1 1
0
35
318 2 1 8
0
35
319 2 1 9
0
35
Advertisement
Table of Contents
