Lucent Technologies Stinger MRT 19 Getting Started Manual page 19

Installation and basic configuration:
–
–
Configuration:
–
–
–
–
RADIUS: TAOS RADIUS Guide and Reference. Describes how to set up a TAOS unit
to use the Remote Authentication Dial-In User Service (RADIUS) server and
contains a complete reference to RADIUS attributes.
Administration and troubleshooting: Stinger Administration Guide. Describes
how to administer the Stinger unit and manage its operations. Each chapter
focuses on a particular aspect of Stinger administration and operations. The
chapters describe tools for system management, network management, and
Simple Network Management Protocol (SNMP) management.
Reference:
–
–
Stinger® MRT Getting Started Guide
effectively. This guide describes keyboard shortcuts and introduces
commands, security levels, profile structure, and parameter types.
Getting Started Guide for your unit. Shows how to install your Stinger chassis
and hardware. This guide shows you how to use the command-line interface
to configure and verify IP access and basic access security on the unit.
The Getting Started Guides for Stinger models with redundant control
modules describe configuration of this feature.
The Stinger MRT Getting Started Guide describes the features and basic
configuration of the trunk modules that are specific to a Stinger MRT.
Module guides for each type of module designed for the Stinger FS, Stinger
FS+, Stinger LS, or Stinger RT, an individual guide describes the module's
features and provides instructions for configuring the module and verifying
its status.
Stinger ATM Configuration Guide. Describes how to use the command-line
interface to configure Asynchronous Transfer Mode (ATM) operations on a
Stinger unit. The guide explains how to configure permanent virtual circuits
(PVCs), and shows how to use standard ATM features such as quality of
service (QoS), connection admission control (CAC), and subtending.
Stinger IP2000 Configuration Guide. For Stinger systems with the IP2000
control module, this guide describes how to integrate the system into the IP
infrastructure. Topics include IP-routed switch-through ATM PVCs and RFC
1483 PVCs that terminate on the IP2000, IEEE 802.1Q VLAN, and
forwarding multicast video transmissions on DSL interfaces.
Stinger Private Network-to-Network Interface (PNNI) Supplement. Provides
quick-start instructions for configuring PNNI and soft PVCs (SPVCs), and
describes the related profiles and commands in the Stinger command-line
interface.
Stinger SNMP Management of the ATM Stack Supplement. Describes Simple
Network Management Protocol (SNMP) management of ATM ports,
interfaces, and connections on a Stinger unit to provide guidelines for
configuring and managing ATM circuits through any SNMP management
utility.
Stinger Reference. An alphabetic reference to Stinger profiles, parameters, and
commands.
TAOS Glossary. Defines terms used in documentation for Stinger units.
About This Guide
Stinger documentation set
xix