Monitoring Errors And Performance Of The Sonet Payload - Lucent Technologies Stinger MRT 19 Getting Started Manual

Parameter
out-of-cell-delineation
loss-of-cell-delineation Loss of cell delineation.
APS-Receive
rsop-bip-error-count
rlop-bip-error-count
rlop-febe-error-count
rpop-bip-error-count
rpop-febe-error-count
racp-chcs-error-count
racp-uchcs-error-count
racp-rx-cell-count
tacp-tx-cell-count
frequency-justification-c
ount
hec-cell-drop-counter
fifo-overflow-counter
idle-cell-counter
valid-cell-counter

Monitoring errors and performance of the SONET payload

The Performance-Monitoring and Interval-Performance-Monitoring subprofiles
include counters for SONET performance and error conditions.
The Performance-Monitoring values and the cumulative performance counters,
which are reset at the end of every 15-minute interval. The information in the
Performance-Monitoring counters is used to update the values in the
Interval-Performance-Monitoring subprofile.
Stinger® MRT Getting Started Guide
Configuring an OC3-ATM Trunk Module
Checking OC3-ATM trunk interface status
Setting
Out of cell delineation. A header error control (HEC)
check failed.
Not currently used.
Number of Receive Section Overhead Processor
(RSOP) bit-interleaved parity (BIP)-8 errors. The RSOP
synchronizes and descrambles frames and provides
section-level alarms and performance monitoring.
Number of Receive Line Overhead Processor (RLOP)
BIP-8 errors. The RLOP is responsible for line-level
alarms and for monitoring performance.
Number of RLOP far-end block errors (FEBE).
Number of Receive Path Overhead Processor (RPOP)
BIP-8 errors. The RSOP interprets pointers and extracts
path overhead and the synchronous payload envelope.
It is also responsible for path-level alarms and for
monitoring performance.
Number of RPOP far-end block errors (FEBE).
Number of Receive ATM Cell Processor (RACP)
correctable header check sequence (CHCS) errors. The
RACP delineates ATM cells and filters cells on the basis
of their idle or unassigned status or HCS errors. It also
descrambles the cell payload.
Number of RACP uncorrectable header check sequence
(UCHCS) errors.
Receive ATM Cell Processor (RACP) receive cell count.
Transmit ATM Cell Processor (TACP) transmit cell
count.
Number of frequency justification operations.
Number of cells dropped by HEC processing.
Number of cells dropped because of first in, first out
(FIFO) overflow.
Total number of idle cells received.
Total number of valid cells received.
10-9