Lucent Technologies Stinger MRT 19 Getting Started Manual page 114

Configuring the ADSL Line Interfaces
Configuring call control
[in DS3-ATM/{ any-shelf any-slot 0 }]
ignore-lineup = system-defined
Parameter
ignore-lineup
ignore-lineup
The commands in the following example configure the unit to use the call-control
procedures systemwide:
admin> read system
SYSTEM read
admin> set ignore-lineup = yes
admin> write
SYSTEM written
When call-control is enabled systemwide, you can disable it on specific interfaces by
modifying the Line profile. The commands in the following example disable
call-control procedures on port 1 of the Stinger MRT:
admin> read al-dmt { 1 1 1 }
SDSL/{ shelf-1 slot-1 1 } read
admin> set ignore-lineup = no
admin> write
SDSL/{ shelf-1 slot-1 1 } written
7-12
Setting
In the System profile, enables or disables the Stinger system's
ability to ignore line status when determining whether calls are
established or not. Specify one of the following values:
no (the default)—The Stinger call-control mechanism
allows calls to be established when the line state is UP and
disallow calls when the line state is DOWN.
yes—The Stinger call-control mechanism ignores the line
state and allows calls to be established on a port as long as
the specified slot is operational and the specified port is
enabled.
In a Line profile, specifies whether the line status of a slot has
an effect on the Stinger call control mechanism on the specified
port. Specify one of the following values:
system-defined (the default)—Sets the Stinger to inherit
the ignore-lineup value from the System profile.
no—Sets the Stinger call-control mechanism to ignore the
systemwide setting and allows calls to be established when
the line is operational and disallow calls on the port when
the line state is DOWN.
yes—Sets the Stinger call-control mechanism to ignore the
line state and the systemwide setting and allows calls to be
established on the specified port as long as the specified slot
is operational and the specified port is enabled.
Stinger® MRT Getting Started Guide