Installing a Stinger MRT
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
MRT cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
System clocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24
Alarm monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24
Before you begin
Verify that you have completed the following tasks:
Selected the installation site
Unpacked the Stinger MRT
Gathered the tools and equipment needed for installation
Verified the trunk module installed in the unit
Warning
!
instructions in the Edge Access and Broadband Access Safety and Compliance Guide. See
Appendix D, "Safety-Related Electrical, Physical, and Environmental Information"
for information specific to your product.
Identifying and installing mounting brackets
You can rack-mount the Stinger MRT 23 chassis horizontally in an equipment rack or
outdoor cabinet using mounting rails that are 23 inches (58.42cm) apart. You can
mount the Stinger MRT 19 horizontally in equipment racks or outdoor cabinets using
mounting rails that are 23 inches, 19 inches, or 17.72 inches apart (58.42cm,
48.26cm, or 45.0cm).
StingerĀ® MRT Getting Started Guide
Before installing the Stinger MRT hardware, be sure to read the safety
3
3-1
3-1
3-9
3-12
3-13
3-14
3-15
3-23
3-24
3-24
3-1