Oc3-Atm Trunk Module Specifications; Module Specifications; Table 10-3 Oc3-Atm Module Specifications - Lucent Technologies Stinger MRT 19 Getting Started Manual

OC3-ATM trunk module specifications

The OC3-ATM trunk module provides up to two 155.52Mbps ports for optical
connections. Each port supports the OC3 and the STM-1 interface standards and
comes with 64KB cell buffers per port, enabling you to customize your network for
specific traffic needs.
You can configure each port as one of the following:
User-to-Network Interface (UNI)
Interim Interswitch Signaling Protocol (IISP) connection
Direct trunk

Module specifications

Table 10-3 lists OC3-ATM module specifications.
Table 10-3. OC3-ATM module specifications
Category
Physical
dimensions
Power
requirements
Temperature
range
Operating
humidity
Agency approvals
Interface
standards (OC-3c)
Interface
standards
(STM-1)
Physical
connectors
Physical interfaces
Stinger® MRT Getting Started Guide
Specifications
Height: 0.875 inches (2.2cm)
Width: 5.85 inches (14.86cm)
Depth: 6.95 inches (17.65cm)
Weight: 6.8 ounces (0.193kg)
4.2 watts (maximum)
-40°F to 149°F (-40°C to 65°C).
0% to 90%, noncondensing.
Electromagnetic Emissions Certifications: FCC Part 15 Class
A, and CISPR Class A.
ANSI T1.105.
ANSI T1.106.
ITU G.957 (optical).
ITU G.709 (optical).
Subscriber connector (SC).
Two UNI 3.0/3.1 cell-bearing OC-3c/STM-1 155.52Mbps
ports (optical).
Configuring an OC3-ATM Trunk Module

OC3-ATM trunk module specifications

10-13