Lucent Technologies Stinger MRT 19 Getting Started Manual page 209

Table 11-2. DS3-ATM trunk module specifications (continued)
Category
Other standards
supported
Physical interfaces
Stinger® MRT Getting Started Guide
Configuring a DS3-ATM Trunk Module
DS3-ATM trunk module specifications
Specification
ANSI T1E1.1/94-002R1.
ANSI T1.107.
ANSI T1.107a.
ANSI T1.403.
ATM Forum UNI 3.0/3.1.
Bellcore TR-NWT 001112.
Bellcore TR-TSY-000499.
Bellcore TR-NWT-000820.
ITU G.804.
RFC 1407.
TR54014 (AT&T ACCUNET T45 and T45R).
Telcordia TR/NWT-000821.
Two ATM UNI 3.0/3.1 cell-bearing DS3 ports
supporting C-bit/M-framing, PLCP according to
TR-TSY-000773, and direct cell mapping according to
G.804.
BNC connector according to ANSI T1.404.
11-11