Usoc Jack And Code Information; Table D-2 Stinger Mrt T1 And E1 Module Usoc Jacks And Codes - Lucent Technologies Stinger MRT 19 Getting Started Manual

Safety-Related Electrical, Physical, and Environmental Information
Electrical and electronic information
Table D-1. Stinger MRT electronic and electrical specifications (continued)
Application
Input voltage
Inrush current
Circuit breaker
Power cable
Connectors
Standards

USOC jack and code information

Stinger MRT equipment complies with Part 68 of the U.S. Federal Communications
Commission (FCC) Rules and uses the universal service order code (USOC) jack type
and code shown in Table D-2. For information about FCC Part 68, see the Edge Access
and Broadband Access Networks Safety and Compliance Guide.
Table D-2. Stinger MRT T1 and E1 module USOC jacks and codes
Model name
STGRMRT-TM-T1-4
STGRMRT-TM-T1-4
STGRMRT-TM-T1-4
STGRMRT-TM-T1-4
STGRMRT-TM-T1-4
STGRMRT-TM-T1-8
STGRMRT-TM-T1-8
STGRMRT-TM-T1-8
STGRMRT-TM-T1-8
STGRMRT-TM-T1-8
STGRMRT-TM-E1-4
D-2
Specification
-42dc to -57.6dc
Minimal because all modules have inrush-limiting
circuits
Original MRT 19 and MRT 23: 5 amps
MRT -SR (standard reach): 4.3 amps
SHDSL MRT: 4.3 amps
In accordance with national standards and
specifications as described in IEC 60950 (minimum
wire size of 0.75mm² or 18 AWG for up to 6amps)
Number 10 terminal lugs
Bellcore GR-1089-CORE, classified A2
Facility interface
code
04DU9-BN
04DU9-DN
04DU9-1KN
04DU9-1SN
04DU9-1ZN
04DU9-BN
04DU9-DN
04DU9-1KN
04DU9-1SN
04DU9-1ZN
04DU9-BN
Service order code Jack type
6.0N RJ-48C
6.0N RJ-48C
6.0N RJ-48C
6.0N RJ-48C
6.0N RJ-48C
6.0N RJ-48C
6.0N RJ-48C
6.0N RJ-48C
6.0N RJ-48C
6.0N RJ-48C
6.0N RJ-48C
Stinger® MRT Getting Started Guide