Lucent Technologies Stinger MRT 19 Getting Started Manual page 166

Configuring T1 and E1 Trunk Modules
IMA-Group-Stat profile
Parameter
rx-avail-cellrate
tx-num-config-links
rx-num-config-inks
tx-num-active-links
rx-num-active-links
tx-oam-label-value
rx-oam-label-value
last-change-time
tpp-test-link
9-24
Setting
Indicates the current cell rate (truncated value in cells
per second) provided by this IMA group in the receive
direction, considering all the receive links in the Active
state.
Valid values for this parameter range from 0 (zero)
through 2147483647.
Indicates the number of links that are configured to
transmit in this IMA group. This parameter overwrites
the value of the imaGroupNumRxActLinks attribute
when the IMA group's group-symmetry-mode
parameter is set to symmetric-operation.
Valid values range from 0 (zero) through 24.
Indicates the number of links that are configured to
receive in this IMA group.
Valid values for this parameter range from 0 (zero)
through 24.
Indicates the number of links that are configured to
transmit and are currently active in this IMA group.
Valid values for this parameter range from 0 (zero)
through 24.
Indicates the number of links that are configured to
receive and are currently active in this IMA group.
Valid values for this parameter range from 0 (zero)
through 24.
Indicates the IMA operations and maintenance (OAM)
label value transmitted by the near-end IMA unit.
Valid values for this parameter range from 1 (one)
through 255.
Indicates the IMA OAM label value transmitted by the
far-end IMA unit. A value of 0 likely means that the
IMA unit has not received an OAM label from the
far-end IMA unit at this time.
Valid values for this parameter range from 0 (zero)
through 255.
The timestamp indicating the number of seconds or
milliseconds that have elapsed since the last time the
IMA group changed state.
Valid values range from 0 (zero) through 2147483647.
Specifies the SNMP interface to be used as the test link
in the test pattern procedure.
Valid values range from -1 to 24.
Stinger® MRT Getting Started Guide