Table of Contents
Advertisement
Parameter
line-config:ima-option-
config
ima-option-config:
txlink-config
ima-option-config:
rxlink-config
DS1-ATM-Stat profile
Following are the parameters for the DS1-ATM-Stat profile, shown with sample
settings.
[in DS1-ATM-STAT/{ shelf-1 slot-18 9 }]
physical-address* = { shelf-1 slot-18 9 }
line-mode = uni
line-state = disabled
loss-of-carrier = True
loss-of-sync = False
ais-receive = True
yellow-receive = False
ber-receive = False
carrier-established = False
cell-delineation = False
network-loopback = False
spare-physical-address = { any-shelf any-slot 0 }
sparing-state = sparing-none
sparing-change-reason = unknown
sparing-change-time = 0
sparing-change-counter = 0
vpi-vci-range = vpi-0-15-vci-32-127
vp-switching-vpi = 15
ima-link-status = { not-in-group not-in-group not-in-group
not-in-group no-fail+
ima-link-statistic = { 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 }
send-code-status = disabled
pattern-test-status = none
Parameter
physical-address
Stinger® MRT Getting Started Guide
Configuring T1 and E1 Trunk Modules
Setting
A subprofile for configuration of an inverse
multiplexing over ATM (IMA) interface.
A subprofile for configuring the transmitting link in
an IMA connection.
A subprofile for configuration of the receiving link in
an IMA connection.
Setting
Identifies the physical address of an interface.
The physical address has the format {shelf slot
item}.
shelf is the shelf in which the item resides.
Since a Stinger unit is a single-shelf system, the
shelf number is always 1.
DS1-ATM-Stat profile
9-11
Advertisement
Table of Contents
