Lucent Technologies Stinger MRT 19 Getting Started Manual page 179

Table 9-3. T1 and E1 line module specifications
Specification
Clocking options
Loopback options
Physical dimensions
Power requirements
Operating humidity
Storage humidity
Ambient operating
temperature
Storage temperature
Maximum rate of temperature
change
Operating altitude
Alarms detected
DS1 MIB supported
IMA compliance
Maximum number of physical
lines per IMA group
Stinger® MRT Getting Started Guide
Configuring T1 and E1 Trunk Modules
T1 and E1 module specifications
Description
The reference clock source can be derived from
one of the following inputs for the Stinger MRT:
BITS input to the Stinger MRT
Trunk module line input
Local oscillator in the unit
Local—digital
Local—analog (full local loopback)
Remote
Height: 0.875 inches (2.2cm)
Width: 5.85 inches (14.86cm)
Depth: 6.95 inches (17.65cm)
Weight: 8.8 ounces (0.249kg)
6 watts (maximum)
10% to 90%, noncondensing
10% to 90%, noncondensing
-40°F to 149°F (-40°C to 65°C)
-40°F to 176° F (-40°C to 80°C)
54°F/hour (30°C/hour)
0 to 13,123 feet (0 to 4000 meters)
Loss of signal (LOS)
Out of frame (OOF)
Remote alarm indication (RAI)
Alarm indication signal (AIS)
Loss of cell delineation (LOCD)
RFC 1406
Compliant with ATM Forum IMA specifications
v1.0 (AF-PHY-0086.000) and v1.1
(AF-PHY-0086.001)
Eight
9-37