Table B-5 Statistics Displayed For A Remote Shelf; Table B-6 Statistics Displayed For The Host Shelf - Lucent Technologies Stinger MRT 19 Getting Started Manual

Table B-5 shows details displayed by this command:
Table B-5. Statistics displayed for a remote shelf
Output field
discovery restart
Number of requests received
Number of Ack Sent
Number of Nack Sent
Number of Reset Sent
Number of Init Sent
When you specify shelf ID 1, indicating the host, the topology -s command
displays the number of erroneous packets received. For example:
HOST> topol -s 1
Discarded packets
Request Rcvd with Invalid ShelfID
Table B-6 shows details displayed by this command:
Table B-6. Statistics displayed for the host shelf
Output field
Discarded packets
Request Rcvd with Invalid
ShelfID
If you execute this command on the remote shelf, statistics are displayed for that
shelf only. For example:
HOST> open 3 8
Stinger® MRT Getting Started Guide
Hosted Operation of Cascaded Stinger MRT units
Description of value
Number of times autodiscovery has been restarted.
Valid
Duplicate
ShelfId
Admin State not
UP
Invalid
Discarded
Number of Acks sent to the shelf.
Number of Nacks sent to the shelf.
Number of Resets sent to the shelf.
Number of Inits sent to the shelf.
: 0
: 0
Description of value
Packets discarded due to header errors, intermediate
shelves being down. No action had been taken on these
packets, they were silently discarded.
Autodiscovery received from with invalid shelf ID (a
shelf ID outside the range from 2 to 7).
Hosted MRT system management
Count of valid requests received.
Another MRT sent requests with
this shelf ID.
Request was received when
administrative state for this shelf
was down or unknown.
An invalid request was received. A
request is invalid is it contains a
protocol Id or version mismatch, or
is sent from invalid intermediate
shelf.
Request discarded, which might
indicate that the intermediate shelf
is down.
B-25