Lucent Technologies Stinger MRT 19 Getting Started Manual page 169

Table of Contents

Advertisement

Parameter
called-number-type
dial-number
clid
auto-profile
ip-options
bridging-options
session-options
telco-options
ppp-options
mp-options
mpp-options
fr-options
tcp-clear-options
answer-options
usrRad-options
calledNumber
Stinger® MRT Getting Started Guide
Configuring T1 and E1 Trunk Modules
Setting
Not currently used. Specifies the type of telephone number
entered in the Connection profile. When the Stinger MRT
dials an outgoing call, the carrier uses the value of
Called-Number-Type in a Connection profile to interpret
the dialed phone number.
Specify one of the following values:
Unknown—Telephone number is of an unknown type.
International—Telephone numbers outside the U.S.
National—Telephone numbers within the U.S. This is
the default.
Local—Telephone numbers within your Centrex
group.
Abbrev—Add-on numbers only.
Network-Specific—The dialed network interprets the
telephone number. This setting uses TypeOfNumber=3 in
the called party's information element.
Not used on the Stinger MRT.
Not used on the Stinger MRT.
Not used on the Stinger MRT.
Not currently used. Subprofile containing IP routing settings.
Bridging specific configuration options that are set by the
system.
Not currently used. Subprofile that specifies session settings
not specific to any encapsulation method or network
protocol.
Subprofile that enables you to set telephone company
options for a connection.
Not used on the Stinger MRT.
Not currently used. Subprofile containing Multilink Protocol
(MP) encapsulation settings.
Not currently used. Answer-Defaults subprofile containing
MultiLink Protocol Plus™ (MP+) encapsulation settings.
Not used on the Stinger MRT.
Not currently used. Subprofile with default setting for TCP
Clear connections.
Not currently used. Type(s) of calls enabled by the
Connection profile—incoming calls, outgoing calls, or both.
Not currently used. Subprofile that defines
connection-specific RADIUS accounting options.
Not used on the Stinger MRT.
Connection profile
9-27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stinger mrt 23

Table of Contents