Table of Contents
Advertisement
4.9
1.888.610.7664
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
After that, you can get its help information by clicking on or tapping the link for the
desired item.
Viewing the Option Information and Install the
Option
This series oscilloscope provides multiple options to fulfill your measurement
requirements. If you need any of these options, order them according to the Order
Appendix A: Options and Accessories
No. available in "
according to this section. Besides, you can also view the option installation status or
activate the newly purchased option.
View the installed option
The instrument is installed with the trial versions of the options before leaving factory.
The trial time starts from the time when you power on the instrument for the first
time, and the trial time is about 2,160 minutes. Perform the following operations to
view the name of the installed option and option installation status.
•
Click or tap the function navigation icon
screen, and then select Utility to enter the utility function menu.
•
Click or tap Options to view the option list.
Install the option
The option license is a string of fixed characters. The license file should be in specific
format, with the filename extension ".lic". After you purchase an option, you will
obtain a key (used for obtaining desired the option license code). Then, you can
install the option according to the following steps.
1. Obtain an option license
a. Log in to the RIGOL official website click SERVICE CENTRE > License
Activation to enter the "Registered product license code" interface.
b. In the software license registration interface, input the correct key, serial
number (click or tap
instrument), and verification code. Then click Generate to obtain the option
license.
2. Install the option
Sending the SCPI commands (:SYSTem:OPTion:INSTall <license>) to install options
is supported. For details, refer to
•
During the installation process, you are not allowed to power off the
instrument.
•
Sending the SCPI commands (:SYSTem:OPTion:INSTall <license>) to install
options is supported. Installing options by using the USB storage device or
inputting the license code manually is not supported.
www.calcert.com
15
10
20
5
25
0
30
", and then install the options
at the lower-left corner of the
> Utility > About to obtain the serial number of the
DHO1000 Programming Guide .
Quick Start
sales@calcert.com
DHO1000 User Guide
Advertisement
Table of Contents
