Bus<N>:Iic (Option) - Rigol DS4000E Series Programming Manual

Chapter 2 Command System
:BUS<n>:IIC (Option)
Command List:
:BUS<n>:IIC:OFFSet

:BUS<n>:IIC:SCLK:SOURce

:BUS<n>:IIC:SCLK:THReshold

:BUS<n>:IIC:SDA:SOURce

:BUS<n>:IIC:SDA:THReshold

:BUS<n>:IIC:OFFSet
Syntax
:BUS<n>:IIC:OFFSet <val>
:BUS<n>:IIC:OFFSet?
Description
Sets or queries the vertical position of IIC decoding on the specified bus.
Parameter
Name Type
<n> Discrete
<val> Integer
Remarks
Before using the command, enable the display of the specified decoding bus (refer to

the :BUS<n>:DISPlay command).
The range of <val> is related to the screen display mode and the on/off status of the statistic function

(refer to the :MEASure:STATistic:DISPlay command).
When the display mode is "Full Screen" and the statistics function is disabled, the <val> parameter
ranges from -166 to +148.
When the display mode is "Full Screen" and the statistics function is enabled, the <val> parameter
ranges from -163 to +143.
When the display mode is "Split" (refer to the :TIMebase:DELay:ENABle and :CALCulate:FFT:SPLit
command), the <val> parameter ranges from -103 to +52.
When the data line that displays the decoding is located in the middle part of the screen, <val> is 0;

when it is located above the middle part of the screen, <val> is a positive value; when it is located
below the middle part of the screen, <val> is a negative value.
Return Format
The query returns an integer.
:BUS<n>:IIC:SCLK:SOURce
Syntax
:BUS<n>:IIC:SCLK:SOURce <source>
:BUS<n>:IIC:SCLK:SOURce?
Description
Sets or queries the source channel of the clock line of IIC decoding on the specified bus.
DS4000E Programming Guide
Range
{1|2}
Refer to Remarks
RIGOL
Default
--
0
2-17