Siemens 6RA7086-6KS22 Operating Instructions Manual page 633

05.05
PNU Description
U777 Offset for analog input on EB2
(2777) i001: AI of the first EB2
i002: AI of the second EB2
(Z118)
(Z119)
U778 Mode of signal injection at analog input on EB2
(2778) 0 = Injection of signal with sign
1 = Injection of absolute value of signal
*
2 = Injection of signal with sign, inverted
3 = Injection of absolute value of signal, inverted
(Z118)
(Z119)
i001: AI of the first EB2
i002: AI of the second EB2
U779 Source for selection of sign reversal at
analog input on EB2
(2779)
Selection of binector to control sign reversal at the analog input ("1" state
*
= reverse sign)
(Z118)
(Z119)
0 = binector B0000
1 = binector B0001
etc.
i001: AI of the first EB2
i002: AI of the second EB2
U780 Filtering time for analog input on EB2
(2780) Note: Hardware filtering of approximately 0.2 ms is applied as standard
(Z118)
i001: AI of the first EB2
(Z119)
i002: AI of the second EB2
U781 Source for enabling of analog inputs on EB2
(2781)
Selection of binector to control enabling of the analog input ("1" state =
enabled)
*
0 = binector B0000
1 = binector B0001
(Z118)
etc.
(Z119)
i001: AI of the first EB2
i002: AI of the second EB2
n782 Display of analog input on EB2
(2782) i001: AI of the first EB2
i002: AI of the second EB2
(Z118)
(Z119)
U783 Source for output value at analog output on EB2
(2783) Selection of connector whose value must be output at the analog output
* 0 = connector K0000
1 = connector K0001
etc.
(Z118)
(Z119)
i001: AO of the first EB2
i002: AO of the second EB2
U784 Mode of signal injection at analog output on EB2
(2784) 0 = Injection of signal with sign
1 = Injection of absolute value of signal
*
2 = Injection of signal with sign, inverted
3 = Injection of absolute value of signal, inverted
(Z118)
(Z119) i001: AO of the first EB2
i002: AO of the second EB2
SIEMENS AG 6RX1700-0AD76
SIMOREG DC Master Operating Instructions
Value range
[Unit]
Steps
[SW 1.5 and later] -100.00 to 100.00
[%]
0.01%
0 to 3
[SW 1.5 and later]
1
[SW 1.5 and later] All binector numbers
1
0 to 10000
[SW 1.5 and later]
[ms]
1ms
[SW 1.5 and later] All binector numbers
1
[SW 1.5 and later] -200.0 to 199.99
[%]
0.01%
[SW 1.5 and later] All connector
numbers
1
[SW 1.5 and later] 0 to 3
1
Parameter list
No. indices See
Factory Change
setting (Access /
Type Status)
Ind: 2 P052 = 3
FS=0.00 P051 = 40
Type: I2 Online
Ind: 2 P052 = 3
FS=0 P051 = 40
Type: O2 Offline
Ind: 2 P052 = 3
FS=0 P051 = 40
Type: L2 Offline
Ind: 2 P052 = 3
FS=0 P051 = 40
Type: O2 Online
Ind: 2 P052 = 3
FS=1 P051 = 40
Type: L2 Offline
Ind: 2 P052 = 3
Type: I2
Ind: 2 P052 = 3
FS=0 P051 = 40
Type: L2 Online
Ind: 2 P052 = 3
FS=0 P051 = 40
Type: O2 Online
11-169