Siemens 6RA7086-6KS22 Operating Instructions Manual page 625

05.05
PNU Description
U729 Source for binector/connector converter for 2
(2729)
Binectors to be converted to connector K8020
*
i001: 1st binector (bit 0)
nd
(Z111) i002: 2 binector (bit 1)
...
th
i016: 16 binector (bit 15)
Settings:
0 = binector B0000
1 = binector B0001
etc.
n732 CB/TB diagnostics
(2732)
Diagnostic information about an installed communications board (CB) or
technology board (TB).
(Z110)
i001 - i032:
(Z111)
i033 - i064:
i065, i066:
i067, i068:
For detailed information, please refer to operating instructions of relevant
CB or TB.
n733 CB/TB receive data
(2733)
Display of control words and setpoints (process data) that are transferred to
the basic converter from a communications board (CB) or technology board
(TB).
(Z110)
(Z111)
st
i001: 1 process data word from 1
...
th
i016 16 process data word from 1
st
i017: 1 process data word from 2
...
th
i032: 16 process data word from 2
U734 Transmit data for first CB/TB (lower slot ID letter)
(2734)
Selection of connectors whose contents must be injected as transmit data to
*
the first communications board (CB) or technology board (TB).
0 = connector K0000
(Z110)
1 = connector K0001
etc.
This parameter not only defines the transmit data, but also their position in
the transmit telegram.
i001: Word 1 in PZD section of telegram
i002: Word 2 in PZD section of telegram
...
i016: Word 16 in PZD section of telegram
Status word 1 (K0032) should be linked to word 1.
n735 Display of transmit data to CB/TB
(2735)
st
i001: 1 process data word to 1
...
th
(Z110) i016 16 process data word to 1
st
(Z111) i017: 1 process data word to 2
...
th
i032: 16 process data word to 2
SIEMENS AG 6RX1700-0AD76
SIMOREG DC Master Operating Instructions
1. CB/TB (lower slot ID letter)
2. CB (higher slot ID letter)
1. CB/TB (internal diagnostic data)
2. CB (internal diagnostic data)
st
CB/TB
st
CB/TB
nd
CB
nd
CB
st
CB or TB
st
CB or TB
nd
CB
nd
CB
nd [SW 1.9 and later]
CB
Value range No. indices
[Unit] Factory
Steps setting
Type
All binector numbers Ind: 16
1 FS=0
Type: L2
Ind: 68
Type: O2
Ind: 32
Type: L2
All connector Ind: 16
numbers FS=
1 i001: 32
i002: 167
i003: 0
i004: 33
i005: 0
to
i016: 0
Type: L2
Ind: 32
Type: L2
Parameter list
See
Change
(Access /
Status)
P052 = 3
P051 = 40
off-line
P052 = 3
P052 = 3
P052 = 3
Online
P052 = 3
11-161