Connections
Cable duct
Connect to cabinet housing at
both ends in conductive,
large-surface connection!
Fig. 1a: Shield at cable entry point to cabinet
Connect to cabinet housing
at both ends in a conductive,
large-area connection!
Fig. 1b: Shielding in the cabinet
6-8
Shield at plant end as well
(e.q. on pulse encoder)
Data line
(e.g. pulse encoder)
(e.g. PROFIBUS-DP)
Shield at the plant end as well
(e.g. on pulse encoder)
Shield connection according to the
following variants 1,2,3 and 4.
Data line
Analog signal line
Do not use shield
rail as strain relief
⇒ Cable clamping bar
Cable clamping bar
Terminals
Siemens AG
SIMOREG DC Master
Operating Instructions
05.05
6RX1700-0AD76