Siemens 6RA7086-6KS22 Operating Instructions Manual page 576

Parameter list
PNU Description
11.61 Processing of connectors
Only active with optional technology software S00
Averager [SW 1.8 and later]
U172 Source for input signal
(2172)
*
S00 i001: 1st averager (FB 16)
i002: 2nd averager (FB 17)
(B139)
i003: 3rd averager (FB 18)
i004: 4. averager
Settings:
0 = Connector K0000
1 = Connector K0001
etc.
U173 Number of sampling cycles
(2173)
i001: 1st averager (FB 16)
S00
i002: 2nd averager (FB 17)
(B139)
i003: 3rd averager (FB 18)
i004: 4. averager
11.62 Limiters, limit-value monitors
Only active with optional technology software S00
Limiters
The input variable selected with index i001 or i004 of the 1
i005 and i006 and applied to the specified connector. Violation of the limit values is signaled by means of two binectors.
U175 Source for input signal and limits for limiter 1
(2175)
Output = connector K9167
*
i001: Input signal
S00
i002: Upper limiting value (L+)
(B134)
i003: Lower limiting value (L-)
(B135)
Source for input signal and limits for limiter 4
Output = connector K9176
i004: Input signal
i005: Upper limiting value (L+)
i006: Lower limiting value (L-)
Settings:
0 = connector K0000
1 = connector K0001
etc.
U176 Limit value for limiter
(2176)
i001: Applied to connector K9165 (FB 65)
S00
i002: Applied to connector K9174 (FB 212)
(B134)
(B135)
11-112
(FB 19)
(FB 19)
st
parameter is limited to the limit values selected with indices i002 and i003 or
Value range
[Unit]
Steps
All connector
[SW 1.8 and later]
numbers
1
[SW 1.8 and later] 1 to 100
1
All connector
FB 65
numbers
1
FB 212
[SW2.0 and later]
-199.99 to 199.99
FB 65, FB212
[%]
0.01%
[SW2.0 and later]
SIMOREG DC Master
05.05
No. indices See
Factory Change
setting (Access /
Type Status)
Ind: 4 P052 = 3
FS=0 P051 = 40
Type: L2 off-line
Ind: 4 P052 = 3
FS=1 P051 = 40
Type: O2 on-line
Ind: 6 P052 = 3
FS= P051 = 40
i001: 0 Offline
i002: 9165
i003: 9166
i004: 0
i005: 9174
i006: 9175
Type: L2
Ind: 2 P052 = 3
FS=100.00 P051 = 40
Type: I2 Offline
SIEMENS AG 6RX1700-0AD76
Operating Instructions