Siemens 6RA7086-6KS22 Operating Instructions Manual page 725

01.04
16 Environmental compatibility
Environmental aspects of development
The number of parts has been greatly reduced through the use of highly integrated components
and a modular design of the entire converter series. As a consequence, the power consumed in
the production process is significantly lower.
Particular importance has been attached to reducing the volume, mass and diversity of metal and
plastic parts.
Front components:
Plastic components in
converter:
Insulation:
Keyboard membrane:
Rating plate:
Flame arresters containing halogen and insulating materials containing silicone have been
replaced by pollutant-free materials on all major components.
Environmental compatibility was an important criterion in the selection of supplied parts.
Environmental aspects of production
Most supplied parts are shipped in reusable packaging. The packaging material itself is recyclable,
consisting mainly of cardboard.
With the exception of the converter housing, surface coating materials have not been applied.
The production process is free of emissions.
Environmental aspects of disposal
The unit features screw and snap-on connections that can be separated easily to dismantle it into
recyclable mechanical components.
The printed circuit boards can be disposed of by thermal processing. The percentage of
components containing dangerous substances is low.
SIEMENS AG 6RX1700-0AD76
SIMOREG DC Master Operating Instructions
PC + ABS Cycoloy
ABS Novodur
PC Lexan 141-R
PA 6.6
SE1-GFN1 Noryl
PC (FR) fl Makrolon or Lexan
Polyester membrane 0.15 mm
Polyester membrane
Environmental compatibility
GE-Plastics
Bayer
16-1