Side Impact Door Ars Sensor Assembly-Renew - Aston Martin V8 Vantage Workshop Manual

2. Install airbag panel and door assembly (see Workshop
Manual procedure 01.12.AJ Panel & Door Assembly -
Air Bag - Renew).
3. Connect battery and reset codes.
Side Impact Door ARS Sensor Assembly-
Renew
Repair Operation Time (ROT)
Item
Side Impact Door ARS Sensor Assembly-
Renew
Removal
1. Remove door trimboard assembly (see Workshop
Manual procedure 01.05.CB Trimboard Assembly -
Door - Remove for Access & Refit).
2. Remove door module securing bolts (x4), swing
downwards.
3. Remove door impact sensor plate securing bolts (x3)
and disconnect sensor multiplug (x1).
4. Remove sensor securing nuts (x2) from plate.
Installation
1. Install sensor on plate and secure nuts (x2).
2. Connect sensor multiplug (x1) and fit plate securing
bolts (x3).
3. Install door module with securing bolts (x4).
4. Install door trimboard assembly (see Workshop Manual
procedure 01.05.CB Trimboard Assembly - Door -
Remove for Access & Refit).
October 2005
Code
01.20.DD
Workshop Manual
Restraining Devices (01.20)
Body System (01.00)
1-13-5