Emission Control (03.08); Maintenance; Vacuum Outlet Hose Assembly-Renew; Secondary Air Injection Pump Tube-Renew - Aston Martin V8 Vantage Workshop Manual

Engine (03.00)

Emission Control (03.08)

Maintenance

Vacuum Outlet Hose Assembly-Renew

Repair Operation Time (ROT)
Item
Vacuum Outlet Hose Assembly-Renew
Removal
1. Remove inlet manifold (see Workshop Manual
procedure 03.01.BB Gasket - Manifold Assembly -
Intake Upper - Renew).
2. Disconnect hose from vacuum reservoir.
3. Disconnect hose from SAI module.
4. Unclip from bracket and remove hose.
Installation
1. Install hose and clip to bracket.
2. Connect hose to SAI module.
3. Connect hose to vacuum reservoir.
4. Install inlet manifold (see Workshop Manual procedure
03.01.BB Gasket - Manifold Assembly - Intake Upper -
Renew).
Secondary Air Injection Pump Tube-
Renew
Repair Operation Time (ROT)
Item
Secondary Air Injection Pump Tube-
Renew
Removal
1. Remove inlet manifold (see Workshop Manual
procedure 03.01.BB Gasket - Manifold Assembly -
Intake Upper - Renew).
2. Disconnect hose from SAI module and remove hose
(quickfit).
Installation
1. Install hose and connect to SAI module (quickfit).
2. Install inlet manifold (see Workshop Manual procedure
03.01.BB Gasket - Manifold Assembly - Intake Upper -
Renew).
Vacuum System Reservoir and Bracket

Assembly-Renew

Repair Operation Time (ROT)
Item
Vacuum System Reservoir and Bracket
Assembly-Renew
Removal
1. Remove inlet manifold (see Workshop Manual
procedure 03.01.BB Gasket - Manifold Assembly -
Intake Upper - Renew).
October 2005
2. Disconnect vacuum hose from reservoir.
3. Unclip harness from bracket.
4. Remove reservoir (bolts x3).
Installation
Code
1. Install reservoir (bolts x3) (torque).
03.08.AC
2. Clip harness to bracket.
3. Connect hose to SAI module.
4. Connect vacuum hose to reservoir.
5. Install inlet manifold (see Workshop Manual procedure
03.01.BB Gasket - Manifold Assembly - Intake Upper -
Renew).
Oil Tank Breather Hose-Renew
Repair Operation Time (ROT)
Item
Oil Tank Breather Hose-Renew
Removal
1. Disconnect hose from cam cover (quickfit).
2. Disconnect hose from oil tank (quickfit) and remove
hose from clip.
Installation
1. Install hose to clip and connect to oil tank (quickfit).
2. Connect hose to cam cover (quickfit).
Air Cleaner to Rocker Cover Hose-Renew
Code
03.08.AD Repair Operation Time (ROT)
Item
Air Cleaner to Rocker Cover Hose-
Renew
Removal
1. Disconnect hose from cam cover (quickfit).
2. Disconnect hose from air duct (quickfit) and remove
hose from clip.
Installation
1. Install hose to clip and connect to air duct (quickfit).
2. Connect hose to cam cover (quickfit).
Oil Separator Tube Assembly-Renew
Repair Operation Time (ROT)
Item
Oil Separator Tube Assembly-Renew
Removal
Code
03.08.AE 1. Release clip and disconnect air cleaner duct from
throttle body.
2. Disconnect hose from oil separator (clip x1).
3. Raise vehicle on ramp.
4. Unclip hose from bracket.
5. Position container to collect any oil spillage.
Workshop Manual

Emission Control (03.08)

Engine (03.00)
Code
03.08.AH
Code
03.08.AJ
Code
03.08.AK
3-9-1