Rh/Lh Rear Lower Bumper Mesh-Renew; Rear Diffuser-Renew; Rear Lower Assembly Centre Mesh-Renew - Aston Martin V8 Vantage Workshop Manual

RH/LH Rear Lower Bumper Mesh-Renew

Repair Operation Time (ROT)
Item
Rear Lower Bumper Mesh
Rear Lower Bumper Mesh
Removal
1. Remove rear bumper (see Workshop Manual procedure
01.19.BA Cover Assembly - Rear Bumper - Renew).
2. Remove torx screws (x2) mesh to bumper armature.
3. Remove torx screw (x2) mesh to bumper bracket and
rear of bumper armature.
4. Remove mesh.
Installation
1. Position mesh.
2. Install torx screws (x4) mesh to bumper bracket and
armature.
3. install rear bumper (see Workshop Manual procedure
01.19.BA Cover Assembly - Rear Bumper - Renew).

Rear Diffuser-Renew

Repair Operation Time (ROT)
Item
Rear Diffuser-Renew
Removal
1. Remove Allen bolts (x4) diffuser to parking distance
sensor brackets.
Installation
1. Align diffuser and install Allen bolts (x4).
Rear Lower Assembly Centre Mesh-
Renew
Repair Operation Time (ROT)
Item
Rear Lower Assembly Centre Mesh-
Renew
Removal
1. Remove rear bumper (see Workshop Manual procedure
01.19.BA Cover Assembly - Rear Bumper - Renew).
2. Remove Torx screws (x3) mesh to bumper armature.
3. Remove mesh.
Installation
1. position mesh.
2. install torx screws (x3).
3. Install rear bumper (see Workshop Manual procedure
01.19.BA Cover Assembly - Rear Bumper - Renew).
October 2005
Code
RH 01.19.CA
LH 01.19.CB
Code
01.19.CC
Code
01.19.CD
Workshop Manual
Bumpers (01.19)
Body System (01.00)
1-12-3