Aston Martin V8 Vantage Workshop Manual page 392

Key Programming
Internet access required
All vehicle keys are required to perform key programming.
Using WDS.
1. Insert the first key to the ignition.
2. Select 'Set up and Configuration' on WDS.
3. Select either:
• Key Learn
• Key Delete
4. Follow the on screen instructions. You will be prompted
to program successive keys as required.
Count Keys
Using WDS.
Select Count keys to check how many keys are programmed
into the vehicle security.
Maintenance
Alarm Siren-Renew
Repair Operation Time (ROT)
Item
TBA
Removal
1. Remove rear bumper (see Workshop Manual procedure
01.19.BA Cover Assembly - Rear Bumper - Renew).
2. Remove nuts (x3) siren control cover to bracket.
3. Loosen nuts (x3) siren control bracket to body.
4. Remove siren control cover
5. Remove siren control from bracket.
6. Disconnect siren control multiplug.
Installation
1. Connect multiplug
2. install siren control to bracket.
3. Install siren control cover.
4. Tighten nuts (x3) siren control bracket to body.
5. Install nuts (x3) cover to siren control module.
6. Install rear bumper (see Workshop Manual procedure
01.19.BA Cover Assembly - Rear Bumper - Renew).
October 2003
Code
Workshop Manual
Active Anti-Theft System (19.01)
Electronic Features (19.00)
19-1-5