Power Steering Cooler To Reservoir Hose And Clip Assembly-Renew - Aston Martin V8 Vantage Workshop Manual

Power Steering Cooler to Reservoir Hose
and Clip Assembly-Renew
Repair Operation Time (ROT)
Item
Power Steering Cooler to Reservoir
Hose and Clip Assembly-Renew
Removal
1. Remove radiator grille (see Workshop Manual
procedure 01.08.AA Grille - Radiator - Renew).
2. Remove PAS fluid from reservoir (syringe).
3. Remove hose from cooler (clip x1).
4. Remove clamp bolt from reservoir bracket.
5. Move reservoir from bracket to access clip, remove clip
and hose.
6. Remove hose from support clip and radiator side seal.
Installation
1. Install hose to support clip and radiator side seal.
2. Install hose and clip and reservoir to bracket.
3. Install hose to cooler (clips x1).
4. Install radiator grille (see Workshop Manual procedure
01.08.AA Grille - Radiator - Renew).
5. Top up PAS fluid.
October 2005
Code
11.02.ED
Workshop Manual
Power Steering (11.02)
Steering (11.00)
11-2-3