Aston Martin V8 Vantage Workshop Manual page 394

Electronic Features (19.00)
Electronic Features Modules
(19.05)
Maintenance
Electronic Passenger Door Module-
Renew
Repair Operation Time (ROT)
Item
Electronic Passenger Door Module-
Renew
Removal
1. Remove door trim panel (see Workshop Manual
procedure 01.05.CB Trimboard Assembly - Door -
Remove for Access & Refit).
2. Remove securing bolts (x4) and multiplugs (x3)
Installation
1. Connect multiplugs (x3) and secure control unit to door
frame.
2. Replace door trim (see Workshop Manual procedure
01.05.CB Trimboard Assembly - Door - Remove for
Access & Refit).
Electronic Driver's Door Module-Renew
Repair Operation Time (ROT)
Item
Electronic Driver's Door Module-Renew
Removal
1. Remove door trim panel (see Workshop Manual
procedure 01.05.CB Trimboard Assembly - Door -
Remove for Access & Refit).
2. Remove securing bolts (x4) and multiplugs (x3)
Installation
1. Connect multiplugs (x3) and secure control unit to door
frame.
2. Replace door trim (see Workshop Manual procedure
01.05.CB Trimboard Assembly - Door - Remove for
Access & Refit).
Tyre Pressure Monitor Module-Renew
Repair Operation Time (ROT)
Item
Tyre Pressure Monitor Module-Renew
Removal
1. Disconnect multiplug from tyre pressure monitor
module.
2. Remove screws (x2) securing tyre pressure monitor
module to IP bracket.
3. Remove tyre pressure monitor module.
October 2003
Installation
1. Install tyre pressure monitor module, install and tighten
screws (x2).
2. Connect multiplug to tyre pressure monitor module.
Code
19.10.BB
Code
19.10.CB
Code
19.10.DB
Workshop Manual
Electronic Features Modules (19.05)
Electronic Features (19.00)
19-2-1