Heater System (12.02); Maintenance; Heater Unit (Including Ecu)-Renew - Aston Martin V8 Vantage Workshop Manual

Climate Control (12.00)

Heater System (12.02)

Maintenance

RHD/LHD Heater Unit (Including ECU)-
Renew
Repair Operation Time (ROT)
Item

Heater Unit (Including ECU)-Renew

Heater Unit (Including ECU)-Renew
Removal
1. Remove IP unit from vehicle (see Workshop Manual
procedure 01.12.AB Facia Assembly LHD Remove for
Access & Refit).
2. Disconnect multiplugs (x6) from heater unit.
3. Remove nuts (x2) and bolt (x1) securing heater unit to IP
unit.
4. Disconnect tube from 'In car' temperature sensor unit
and remove heater unit from IP.
Installation
1. Connect tube to 'In car' temperature sensor, install
heater unit in position on IP .
2. Position heater unit in IP. Install and torque tighten bolt
and nuts (x2).
3. Connect multiplugs (x6) to heater unit.
4. Install IP unit in vehicle (see Workshop Manual
procedure 01.12.AB Facia Assembly LHD Remove for
Access & Refit).
October 2005
Code
RHD 12.03.AF
LHD 12.03.AD
Workshop Manual

Heater System (12.02)

12-2-1