Upper Flap Motor Assembly Renew; Lower Flap Motor Assembly Renew - Aston Martin DB7 Workshop Manual

Air Conditioning Repair Procedures
Upper/Lower Flap Motor Renew
[EB^^^?
8.2.05.1 Upper Flap Motor Assembly
Renew
8.2.06.1 Lower Flap Motor Assembly
Renew
1. Disconnect the battery earth lead.
2. Remove the electronic control module.
3. Disconnect the motor block connector.
4. Remove the securing screws and motor assembly
(Figl).
Figure 5.
5. Fitting a new motor is the reverse of the removal
procedure.
1. Disconnect the battery earth lead.
2. Remove the right hand side underscuttle casing.
3. Remove the electronic control unit.
4. Disconnect the block connector.
5. Remove the screws securing the motor to the air
conditioning unit.
6. Displace the'P'clip.
7. Withdraw and remove the motor from the air
conditioning unit.
8. Fitting a new motor is the reversal of the removal
procedure.
8-58 May 1996