Gps Tuner-Renew - Aston Martin V8 Vantage Workshop Manual

2. Remove bolts (x4) from tuner base plate to wheel arch
(see Fig. 1).
3. Remove nuts (x2) from AM/FM tuner to base plate.
4. Remove GPS tuner and bracket assembly.
5. Disconnect service loop multiplug and release harness
retainer from baseplate bracket.
6. Disconnect multiplugs (x2) and lucar connector from
AM/FM tuner.
7. Remove spacers and tuner from base plate.
Installation
1. Install AM/FM tuner and spacers to base plate.
2. Connect multiplugs and lucar connector.
3. Secure harness retainer to base plate and connect
service loop multiplug.
4. Install GPS tuner and bracket and secure with nuts (x2).
5. Position base plate and secure with bolts (x4).
6. Fit RH wheel arch liner (see Workshop Manual
procedure 01.02.JB Wheel Arch Liner - Rear - LH -
Renew).

GPS Tuner-Renew

Repair Operation Time (ROT)
Item
GPS Tuner-Renew
1. Remove RH rear wheel arch liner (see Workshop
Manual procedure 01.02.JB Wheel Arch Liner - Rear -
LH - Renew).
October 2005
Fig. 1
Code
19.07.CD
Workshop Manual
2. Remove bolts (x4) from tuner base plate to wheel arch
(see Fig. 1).
3. Remove bolts (x2) from GPS tuner to bracket (see Fig.
2).
4. Disconnect harness connections and remove GPS tuner.
Installation
1. Position GPS tuner to bracket and install bolts (x2).
2. Connect harness multiplugs.
3. Position base plate and secure with bolts (x4).
4. Install RH rear wheel arch liner (see Workshop Manual
procedure 01.02.JB Wheel Arch Liner - Rear - LH -
Renew).
Rear Fog Switch-Renew
Repair Operation Time (ROT)
Item
Rear Fog Switch-Renew
Removal
1. Remove centre stack assembly (see Workshop Manual
procedure 15.01.CF Centre Stack Assembly - Remove
for Access and Refit).
Fig. 1
Fig. 2
Code
15.01.CK
15-1-5