Door Window Reset; Bodywork And Fittings - Aston Martin DB9 2006 Manual

Table of Contents

Advertisement

Rear Lamps
The Indicators, Stop / Tail, Reversing and Rear Fog LEDs are
contained in a sealed lamp cluster unit, one either side of the
vehicle. The lamp cluster is not repairable.
The high level mounted stop lamp unit consists of LEDs and
is not repairable.
LEDs can last tens of thousands of hours and are resistant to
heat, cold, shock and vibration.
If a rear lamp fails contact your Aston Martin Dealer.
12.38

Door Window Reset

If power to the electric windows has been interrupted for any
reason, they will fail to operate correctly until reset.
1. Sit in the driver's seat. Close both doors and switch the
ignition to '0'.
2. Press firmly and hold the window switch until the
window is at the maximum down position. Continue to
hold the button for 5 seconds then release.
3. Pull back and hold the window switch until the window
is in the maximum up position. Continue to hold the
switch for a further 5 seconds, then release.
4. The window is now reset. Repeat for the second window.

Bodywork and Fittings

Checks and Maintenance
Door drain holes
Check the drain holes in the bottom face of each door
periodically and clear if necessary with, i.e. a short length of
wire or a pipe cleaner.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents