Aston Martin V8 Vantage Workshop Manual page 320

Maintenance
Vacuum Assembly Pump-Renew
Repair Operation Time (ROT)
Item
Vacuum Assembly Pump-Renew
Removal
1. Remove rear bumper (see Workshop Manual procedure
01.19.BA Cover Assembly - Rear Bumper - Renew).
2. Disconnect vacuum pump multiplug.
3. Remove vacuum pump tubes.
4. Remove vacuum pump from bracket
Installation
1. Install vacuum pump to mounting bracket.
2. Connect vacuum pump tubes.
3. Connect vacuum pump multiplug.
4. Install rear bumper (see Workshop Manual procedure
01.19.BA Cover Assembly - Rear Bumper - Renew).
October 2005
Code
16.00.AD
Workshop Manual
Body Vacuum System (16.01)
Vacuum Distribution (16.00)
16-1-3