Aston Martin V8 Vantage Workshop Manual page 204

Installation
1. Install modulator to mounting bracket, install and torque
tighten Torx bolts (x3).
2. Install modulator to body, install and torque tighten Torx
bolts (x3).
3. Remove plugs. Install and torque tighten brake unions
(x6) to modulator.
4. Connect modulator multiplug.
5. Install wheel arch liner. (see Workshop Manual
procedure 01.02.FB Wheel Arch Liner - Front - LH -
Renew).
6. Bleed braking system (see Workshop Manual procedure
06.07.DD Brake Hydraulic System - Flush/Refill/Bleed).
7. Install road wheel/s.
8. Lower vehicle on ramp.
October 2005 Workshop Manual
Brake Actuation System (06.06)
Brake System (06.00)
6-4-7