Aston Martin V8 Vantage Workshop Manual page 74

Subframes (02.03)
Frame and Mounting (02.00)
16. Use tool 206-103 and release each handbrake cable
from mounting brackets.
17. Release inner cable eyelets from calliper levers (see Fig. 21. Loosen and disconnect each brake pipe from body
1).
18. Remove bolts (x2) and nuts (x2) from handbrake cables
to subframe (see Fig. 2).
19. Use tool 206-103 and release handbrake cables from
subframe brackets (see Fig. 3).
2-1-8

Fig. 1

Fig. 2

Fig. 3
Workshop Manual
20. Release handbrake cable from clip and tie handbrake
cable aside.
bracket and plug brake pipes (see Fig. 4).
22. Remove bolt from fuel filler pipe to damper mounting.
23. Remove nut securing fuel filler pipe to body and tie filler
pipe aside.
24. Remove bolts (x4 each side) that secure spring and
damper assemblies (see Fig. 5).
25. Position drain tray to collect oil spillage.

Fig. 4

Fig. 5
October 2005