Steering Wheel (11.06); Specifications; Maintenance; Steering Wheel-Renew - Aston Martin V8 Vantage Workshop Manual

Steering (11.00)

Steering Wheel (11.06)

Specifications

Maintenance

Steering Wheel-Renew

Repair Operation Time (ROT)
Item
Steering Wheel-Renew
Removal
1. Disconnect vehicle battery.
2. Remove driver's airbag module (see Workshop Manual
Procedure 11.06.BC Module - Drivers Airbag - Renew).
3. Place steering wheel in straight ahead position.
4. Remove ignition key.
5. Remove steering wheel retaining Torx bolt (see Fig. 1).
6. Disconnect multiplug from cruise control.
7. Remove steering wheel.
8. Secure rotary coupler to steering column with tape.
Installation
1. Remove tape from rotary coupler.
2. Ensure steering is set in the straight ahead position.
3. Install steering wheel on column.
4. Install and tighten retaining Torx bolt (40 Nm).
5. Connect multiplug, cruise control.
6. Install driver's airbag module (see Workshop Manual
procedure 11.06.BC Module - Drivers Airbag - Renew).
7. Connect vehicle battery.
October 2005
Code
11.06.AB
Fig. 1
Workshop Manual

Steering Wheel (11.06)

Steering (11.00)
11-5-1