Interior Trim (01.05); Maintenance; Rear Centre Console-Renew; Rh/Lh Front Sill Plate-Renew - Aston Martin V8 Vantage Workshop Manual

Body System (01.00)

Interior Trim (01.05)

This section covers removal and installation of the interior moldings and trim panels. In many instances, one component
overlaps another component. If this condition is found, it will be necessary to loosen or remove the overlapping
component before removal, to prevent damage to either component.

Maintenance

Rear Centre Console-Renew

Repair Operation Time (ROT)
Item
Rear Centre Console-Renew
Removal
1. Remove storage compartment door.
2. Remove bolt and screws (x5) from storage compartment
support rail.
3. Release and remove centre arm rest (see Fig. 1).
4. Remove nuts (x3), screws (x4) from panel assembly rear 1. Install name plate to front plate.
console (see Fig. 2).
Installation
1. Install panel and tighten nuts (x3) and screws (x4).
2. Install centre arm rest.
3. Install support rail and tighten screws (x5) and bolt.
October 2005
Code
01.04.BB
Fig. 1
Fig. 2
Workshop Manual
4. Install storage compartment door.

RH/LH Front Sill Plate-Renew

Repair Operation Time (ROT)
Item
Front Sill Plate-Renew
Front Sill Plate-Renew
Removal
1. Remove screws (x2) name plate to front plate.
2. Remove bolts (x6) front plate to sill.
3. Remove front plate
Installation
1. Position front plate and install bolts (x6).
2. Install front sill name plate.

RH/LH Front Sill Name Plate-Renew

Repair Operation Time (ROT)
Item
Front Sill Name Plate-Renew
Front Sill Name Plate-Renew
Removal
1. Remove screws (x2) name plate to front plate.
2. Remove name plate.
Installation

Header Panel Assembly-Renew

Repair Operation Time (ROT)
Item
Header Panel Assembly-Renew
Removal
1. Remove grill from front header courtesy light console.

Interior Trim (01.05)

Body System (01.00)
Code
RH 01.05.AJ
LH 01.05.AK
Code
RH 01.05.AL
LH 01.05.AM
Code
01.05.BB
1-4-1