Infotainment Control Module-Renew; Display Screen-Renew; Clock-Renew; Satellite Navigation Switchpack-Renew - Aston Martin V8 Vantage Workshop Manual

Infotainment Control Module-Renew

Repair Operation Time (ROT)
Item
Infotainment Control Module-Renew

Removal

1. Remove centre stack assembly (see Workshop Manual
procedure 15.01.CF Centre Stack Assembly - Remove
for Access & Refit).
2. Remove centre stack support bracket securing screws
(x8).
3. Remove Infotainment Control Module interface driver.
Installation
1. Position Infotainment Control Module interface driver
and fit centre stack support bracket securing with screws
(x8).
2. Install centre stack assembly (See Workshop Manual
procedure 15.01.CF Centre Stack Assembly - Remove
for Access & Refit).

Display Screen-Renew

Repair Operation Time (ROT)
Item
Display Screen-Renew
Removal
1. Remove centre stack assembly (see Workshop Manual
procedure 15.01.CF Centre Stack Assembly - Remove
for Access & Refit).
2. Remove centre stack support bracket securing screws
(x8) and remove Infotainment Control Module.
3. Place assembly onto a thick soft base and push out
protective screen.
Installation
1. Clean off old adhesive and fit new screen.
2. Align Infotainment Control Module and fix centre stack
support bracket with screws (x8).
3. Refit centre stack assembly (see Workshop Manual
procedure 15.01.CF Centre Stack Assembly - Remove
for Access & Refit).

Clock-Renew

Repair Operation Time (ROT)
Item
Clock-Renew
Removal
1. Remove Infotainment Control Module (see Workshop
Manual procedure 15.01.CF Infotainment Control
Module - Renew).
2. Remove clock unit screws (x2).
Installation
1. Refit clock unit and secure with screws (x2).
15-1-4
2. Install Infotainment Control Module (see Workshop
Manual procedure 15.01.CF Infotainment Control
Module - Renew).
Code

Satellite Navigation Switchpack-Renew

15.01.CF
Repair Operation Time (ROT)
Item
Satellite Navigation Switchpack-Renew
Removal
1. Remove centre stack support bracket and Infotainment
Control Module from centre stack assembly (see
Workshop Manual procedure 15.01.CF Infotainment
Control Module - Renew).
2. Remove satellite navigation switchpack securing screws
(x2) and multiplugs (x1) from centre stack assembly.
Installation
1. Refit satellite navigation switchpack to centre stack
assembly (x2 screws and x1 multiplug).
2. Refit centre stack assembly (see Workshop Manual
procedure15.01.CF Infotainment Control Module -
Renew).

CD Player-Renew

Code
Repair Operation Time (ROT)
15.01.CG
Item
CD Player-Renew
Removal
1. Remove centre stack assembly (see Workshop Manual
procedure 15.01.CF Centre Stack Assembly - Remove
for Access & Refit).
2. Remove CD player (2 screws and 1 multiplug).
Installation
1. Install CD player (1 multiplug & 2 screws).
2. Install centre stack assembly (see Workshop Manual
procedure 15.01.CF Centre Stack Assembly - Remove
for Access and Refit).

Tuner AM/FM-Renew

Repair Operation Time (ROT)
Item
Tuner AM/FM-Renew
Removal
Code
1. Remove RH wheel arch liner (see Workshop Manual
15.01.CH
procedure 01.02.JB Wheel Arch Liner - Rear - LH -
Renew).
Workshop Manual
Code
15.01.CJ
Code
15.01.DA
Code
15.02.AC
October 2005