10. Remove bolt securing earth lead to transaxle (see Fig. 2).
11. Mark drive shaft to differential flanges for assembly
purposes.
12. Remove and discard Allen bolts (x12)from drive shaft
flanges to transaxle and collect plates (x6) (see Fig. 3).
13. Release drive shafts from transaxle and position aside
(see Fig. 4).
14. Position drain container to collect oil spillage.
October 2005
Fig. 2
Fig. 3
Fig. 4
Workshop Manual
Manual Transmission (07.03)
15. Loosen unions and disconnect oil cooler pipes (x2) from
transaxle interconnecting pipes (see Fig. 5)
16. Plug pipe connections (x4).
17. Remove drain container.
18. Disconnect transaxle breather pipe (see Fig. 6).
19. Remove nuts (x2) from hydra mounts to subframe
mountings (see Fig. 7).
Transmission (07.00)
.
Fig. 5
Fig. 6
Fig. 7
7-2-3