Aston Martin V8 Vantage Workshop Manual page 213

Anti-lock Braking System (ABS) (06.09)
Brake system (06.00)
3. Remove ABS sensor multiplug (see Fig. 1).
4. Remove ABS sensor and screw (x1) (see Fig. 2).
Installation
1. Clean knuckle.
2. Install new sensor and tighten screw (x1).
3. Install sensor multiplug.
4. Install road wheel/s.
5. Lower vehicle on ramp.
Rear Wheel Speed Sensor-Renew
Repair Operation Time (ROT)
Item
Rear Wheel Speed Sensor-Renew
Front Wheel Speed Sensor-Renew
1. Raise vehicle on ramp.
2. Remove road wheel/s
3. Remove ABS sensor multiplug.
4. Remove ABS sensor and screw (x1).
Installation
1. Clean knuckle.
2. Install new sensor and secure screw (x1) (torque).
6-6-4
Fig. 1
Fig. 2
Code
LH 06.09.BB
RH 06.09.DB
Workshop Manual
3. Install sensor multiplug.
4. Install road wheel/s
5. Lower vehicle on ramp.
October 2005