Aston Martin V8 Vantage Workshop Manual page 56

7. Clip W/Washer pipe into reservoir and install to motor.
8. Clip H/lamp washer pipe, connect pipe (quickfit) and
multiplug.
9. Connect windscreen washer motor multiplug.
10. Raise ramp.
11. Connect clip (x1) securing level sensor harness to
reservoir.
12. Connect clips (x2) securing battery harness to bottom of
reservoir.
13. Remove RH wheel arch liner (see Workshop Manual
procedure 01.02.GB Wheel Arch Liner - Front - RH -
Renew).
14. Fill washer reservoir.
October 2005 Workshop Manual
Wipers and Washer System (01.16)
Body System (01.00)
1-11-5